Iei-integration IMB-H610A Manuel d'utilisateur télécharger pdf (Page 68)

IMB-H610 Micro-ATX Motherboard

Page 53

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1: A cooling kit bracket is pre-installed on the rear of the motherboard. See Figure

4-6.

Figure 4-6: Cooling Kit Support Bracket

Step 2: Place the cooling kit onto the socket LGA1155 CPU. Make sure the CPU

cable can be properly routed when the cooling kit is installed.

Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make

sure the four threaded screws on the corners of the cooling kit properly pass

through the holes of the cooling kit bracket.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 191 192

Pas de commentaire

Iei-integration IMB-H610A Manuel d'utilisateur Page 68