Iei-integration IMBA-C2060 v2.01 Manuel d'utilisateur télécharger pdf (Page 71)

IMBA-C2060 ATX Motherboard

Page 55

4.2.2 Socket LGA1155 Cooling Kit Installation

WARNING:

DO NOT attempt to install a push-pin cooling fan.

The pre-installed support bracket prevents the board from

bending and is ONLY compatible with captive screw type cooling

fans.

Figure 4-5: Cooling Kits (CF-1156A-RS and CF-1156E-RS)

The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1: A cooling kit bracket is pre-installed on the rear of the motherboard. See

Figure

4-6.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 208 209

Pas de commentaire

Iei-integration IMBA-C2060 v2.01 Manuel d'utilisateur Page 71