Iei-integration NOVA-PV-D4251_D5251 v1.01 Manuel d'utilisateur télécharger pdf (Page 100)

NOVA-PV-D5251/D4251 5.25" SBC

Page 86

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the NOVA-PV-D5251/D4251 USB connector.

Step 3: Insert the cable connectors. Once the cable connectors are properly aligned

with the USB connectors on the NOVA-PV-D5251/D4251, connect the cable

connectors to the on-board connectors. See

Figure 4-20.

Figure 4-20: Dual USB Cable Connection

Step 4: Attach the USB connectors to the chassis. The USB 2.0 connectors each of

two retention screw holes. To secure the connectors to the chassis please refer

to the installation instructions that came with the chassis.Step 0:

4.8 External Peripheral Interface Connection

The following external peripheral devices can be connected to the external peripheral

interface connectors.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 178 179

Pas de commentaire

Iei-integration NOVA-PV-D4251_D5251 v1.01 Manuel d'utilisateur Page 100