Iei-integration NOVA-PV-D4251_D5251 v1.01 Manuel d'utilisateur télécharger pdf (Page 93)

NOVA-PV-D5251/D4251 5.25" SBC

Page 79

Step 1: Locate the connector. The location of the keyboard/mouse Y-cable connector

is shown in Chapter 3.

Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on

the NOVA-PV-D5251/D4251 keyboard/mouse connector. See

Figure 4-13.

Step 3: Insert the cable connectors. Once the cable connector is properly aligned with

the keyboard/mouse connector on the NOVA-PV-D5251/D4251, connect the

cable connector to the on-board connectors. See

Figure 4-13.

Figure 4-13: Keyboard/mouse Y-cable Connection

Step 4: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable

connector is connected to two PS/2 connectors. To secure the PS/2 connectors

to the chassis please refer to the installation instructions that came with the

chassis.

Step 5: Connect the keyboard and mouse. Once the PS/2 connectors are connected

to the chassis, a keyboard and mouse can each be connected to one of the

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 178 179

Pas de commentaire

Iei-integration NOVA-PV-D4251_D5251 v1.01 Manuel d'utilisateur Page 93